Classifieds > For Sale
Used Equipment for Sale
This is the current equipment that is for sale. Please contact the person directly in the ad for the equipment you are interested in.
If you need to remove your posting, please email us here |
|
3/30/20 Pro Spot Aluminum Weld Station
Pro Spot Aluminum Weld Station, used 2 times - $9,800
Contact Tim Stone at (480) 201-7941 or usedcollisionequip@gmail.com
Contact Tim Stone at (480) 201-7941 or usedcollisionequip@gmail.com
3/30/20 Eurovac Wet Mix Dust Collector
This unit is brand new, our company paid just over $10,000 1 1/2 years ago. Also available is the aluminum tool box with misc new aluminum repair tools and sand papers - $1,500. Wet mix dust collector, fabricated from 14 gauge stainless steel which is then thermoset powder coat painted.
Manual water level system whereby the customer fills the unit with more water when the water level gets to a certain level marked on the site glass.
Manual drain valve located at the bottom of the separator. Initial stainless steel venturi entry for deep penetration into the water, secondary baffles to completely mix the dust particulate with the water whereby no after dry/hepa filter is required. Site glass to visually check the water level.
Automatic low water shut down sensor which prevents the unit from operating if water is not set at proper levels. A time delay switch is provided to prevent the start of the dust-producing process (sanding tools) until the collector is in complete operation. An off delay time switch is provided which allows the system to run for a set amount of time once the sanding has stopped. This ensures all dust in the hose reaches the collector.
System includes (2) 25’ lightweight anti-static hose with attached airline.
Contact Tim Stone at (480) 201-7941 or usedcollisionequip@gmail.com
Manual water level system whereby the customer fills the unit with more water when the water level gets to a certain level marked on the site glass.
Manual drain valve located at the bottom of the separator. Initial stainless steel venturi entry for deep penetration into the water, secondary baffles to completely mix the dust particulate with the water whereby no after dry/hepa filter is required. Site glass to visually check the water level.
Automatic low water shut down sensor which prevents the unit from operating if water is not set at proper levels. A time delay switch is provided to prevent the start of the dust-producing process (sanding tools) until the collector is in complete operation. An off delay time switch is provided which allows the system to run for a set amount of time once the sanding has stopped. This ensures all dust in the hose reaches the collector.
System includes (2) 25’ lightweight anti-static hose with attached airline.
Contact Tim Stone at (480) 201-7941 or usedcollisionequip@gmail.com
3/2/20 Chief Easy Liner Frame Machine
Chief Easy Liner II, works fine, upgraded to a Goliath. Asking $15,000.00 OBO.
Contact Dennis Culley at Dualan Collision Center at dualanbodyshop@aol.com
Contact Dennis Culley at Dualan Collision Center at dualanbodyshop@aol.com
2/26/20 Standard Pulling Post and Pinch Weld Stands
Standard Pulling post and Pinch weld stands. New Cylinder, Everything works, no chains.
Contact Joey Lake of Joey's Body Shop at joeysbodyshopatx@gmail.com
Contact Joey Lake of Joey's Body Shop at joeysbodyshopatx@gmail.com
2/4/20 Kansas Jack Frame Machine
Platform is 7ft wide 18ft. 3inches long
Post swing out 3 1/2 ft on each side. Comes equipped with all attachments. Asking $10,000.
Located in Portland OR.
Contact at (503) 880-0058 or email at P.pietrzyk@comcast.net
Post swing out 3 1/2 ft on each side. Comes equipped with all attachments. Asking $10,000.
Located in Portland OR.
Contact at (503) 880-0058 or email at P.pietrzyk@comcast.net
1/23/20 Pro Spot Welder
$15,000.00
Pro Spot Welder PHS101 Battery Powered Resistance Spot Welder with Extra Arms. Bought 2017 with very little use.
Contact Robert McNutt of McNutt Body Shop at mcnuttbodyshop@gmail.com
Pro Spot Welder PHS101 Battery Powered Resistance Spot Welder with Extra Arms. Bought 2017 with very little use.
Contact Robert McNutt of McNutt Body Shop at mcnuttbodyshop@gmail.com
12/30/19 Chief EZ Liner with Velocity Laser Alignment
Chief EZ Liner With Velosity Laser Alignment -Truck N Revolution Chassis Liner Frame Machine with Tower and Extension included. Chief Fast-Anchoring Package. Numerous other attachments, adaptors and clamps included. Electric frame winch-120 volt a/c powered, 1500 pound capacity
Used in excellent working condition……… $15,000
Contact Wayne Moore after 5:00 pm (662) 710-6287 or waynemoorebodyshop@gmail.com
Used in excellent working condition……… $15,000
Contact Wayne Moore after 5:00 pm (662) 710-6287 or waynemoorebodyshop@gmail.com
12/30/19 Pittsburgh Gantry Crane
Pittsburgh A-Frame Gantry Crane With Electric Hoist-110 volts. Can be adjusted to different heights and is fully movable on wheels.
One owner, bought new….$1,500.00
Contact Wayne Moore after 5:00 pm (662) 710-6287 or waynemoorebodyshop@gmail.com
One owner, bought new….$1,500.00
Contact Wayne Moore after 5:00 pm (662) 710-6287 or waynemoorebodyshop@gmail.com
12/30/19 Robinair A/C System
Robinair A/C Evacuate and Recharge System-
One owner in excellent working condition. $1500
Contact Wayne Moore after 5:00 pm (662) 710-6287 or waynemoorebodyshop@gmail.com
One owner in excellent working condition. $1500
Contact Wayne Moore after 5:00 pm (662) 710-6287 or waynemoorebodyshop@gmail.com
12/30/19 i4 Pro Spot Water-Cooled Spot Welder
i4 Pro Spot Water-Cooled Inverter Resistance Spot Welder-Attachments included in addition to C-X Adapter (PR-2000/i4), C-Arm, PRO-66 Pro Pull, 600 MM Extension Arm, Pneumatic Electrode Dresser (Low Profile), and Protective Cover-System is Used (one-owner) and
in excellent condition…….$15,000
Contact Wayne Moore after 5:00 pm (662) 710-6287 or waynemoorebodyshop@gmail.com
in excellent condition…….$15,000
Contact Wayne Moore after 5:00 pm (662) 710-6287 or waynemoorebodyshop@gmail.com
